Trusted CO2 Laser Cutting & Engraving Partner Since 2008 Request a Free Quote

The xTool F1 Ultra Laser Wavelength Is the Spec I'd Check Before Buying

Start here: the wavelength is the buying decision

If you're looking at the xTool F1 Ultra and wondering whether it handles metal, skip the sample photos and look at the spec sheet: it runs two lasers, a 20W fiber source at 1064nm and a 20W diode source at 455nm. That's the whole story. The fiber side marks and engraves metal. The diode side handles wood, leather, acrylic, glass, and most of what people mean when they say "organic material." Everything else—the rotary attachment, the color engraving claims, the software presets—is secondary to that one number split.

In my opinion, most of the disappointing reviews on dual-laser machines come from buyers who purchased one wavelength and expected the other. So before you order any engraving machine for sale online, confirm which jobs you actually run. That's the test.

Why I trust this lens

I'm a quality and brand compliance manager at a small laser job shop. I review every finished piece before it ships—roughly 200 items a month, plus supplier samples. In Q1 2024 I rejected 18% of first deliveries from a new materials vendor because the anodized layer measured 0.12mm against our 0.08mm spec. Normal tolerance was ±0.01mm. The vendor called it "industry standard." We sent the batch back at their cost.

We didn't have a formal incoming-inspection process before that. Cost us when a run of 600 stainless tags went out with inconsistent etch depth—two customers noticed before we did. Now every job has a wavelength-and-power sign-off sheet. Should've built it after the first warning, honestly.

What the two wavelengths actually do

1064nm fiber: metal, and not much else

The fiber source is the reason the xTool F1 Ultra can do cutting metal at all. At 20W it will mark stainless, aluminum, brass, and titanium cleanly, and it will cut thin sheet—think 0.5mm stainless or 1mm aluminum for tags and shims, not structural plate. The published specs put the fiber spot diameter in the tens of microns, which is why deep engraving on metal looks sharp rather than fuzzy.

What it won't do is behave like a 2kW industrial fiber cutter. If your job involves 3mm steel, this isn't the machine, and no amount of parameter tuning changes that. I've watched people burn through a week of testing before admitting it (unfortunately).

455nm diode: the wood engraver side

The diode source is what most people actually use day to day. For a wood engraver, 455nm is well-absorbed by wood, leather, paper, and dark acrylic, which means efficient marking at moderate power. On light-colored material it will cut reasonably fast; on clear acrylic it mostly won't, because the material transmits blue light instead of absorbing it. That's physics, not a firmware issue.

When I compared a fiber-marked brass plate against a diode-etched one side by side, I finally understood why the wavelength matters more than the wattage printed on the box. Same power, completely different result, because the material absorbed the light differently.

Metal cutting and gold engraving: where the marketing gets fuzzy

The phrase laser engraving on gold shows up a lot in product copy, and technically the 1064nm fiber handles it. Gold is soft and reflective, so the practical result is a shallow mark or a controlled oxidation—not a deep carve, and definitely not a "no damage" process. If you're marking jewelry or blanks, test on scrap first. Reflective metals also need the focus dialed in more carefully than the presets suggest, and small parameter drift shows up fast on polished surfaces.

Same applies to xtool f1 ultra cutting metal claims. It cuts. It doesn't cut everything at every thickness. The honest framing is: thin sheet, controlled feed rate, multiple passes, and a lot of test coupons before you commit a customer order.

The color engraving feature is real but narrower than the demos imply. It works on specific stainless alloys under specific parameter sets, producing an oxide layer that reads as color. It is not full-color printing, and it doesn't transfer reliably to other metals without a fresh round of testing. I'd treat it as a bonus, not a purchase reason.

When this machine is the wrong answer

Three situations where I'd steer a buyer elsewhere. First, production volume above a few hundred identical pieces per week—the work envelope and single-piece workflow don't scale like a galvo marker on a conveyor. Second, anything involving thick metal or deep industrial cutting; that's a different class of equipment entirely. Third, shops that only do wood and leather. You'd be paying for a fiber source you never fire, and the diode-only alternatives are cheaper and simpler to maintain.

On the flip side, for a small factory or a job shop doing mixed-material runs—metal tags Monday, leather patches Tuesday, wood signs Friday—the dual-wavelength setup is genuinely useful. Just budget for scrap material during the first two weeks of tuning. Everyone does it. The people who claim they nailed the parameters on day one are either lying or only running one material.

Verify current specifications and pricing directly at xtool.com as of January 2025; configurations and bundles change, and the wavelength specs above are the numbers that actually govern what the machine can do.

Share this article:
author-avatar
Jane Smith

I’m Jane Smith, a senior content writer with over 15 years of experience in the packaging and printing industry. I specialize in writing about the latest trends, technologies, and best practices in packaging design, sustainability, and printing techniques. My goal is to help businesses understand complex printing processes and design solutions that enhance both product packaging and brand visibility.

Leave a Reply